BetaFPV Air75 II Champion - 1S ELRS

Air75 II Champion is a lightweight 1S Tinywhoop designed for racing and freestyle flying both indoors and outdoors. Champion is the most powerful variant of the BetaFPV Air75 II series intended for fast flying and experienced pilots. The Champion variant uses motors with ball bearings, which are soldered to the board to reduce weight instead of being connected via connectors. The drone utilizes 40mm propellers and has a motor diagonal distance of 75 mm. With a low weight of about 20 g, it offers very nimble behavior and precise control while maintaining flight safety.

In the second version, there is a new AIO board that targets higher durability in crashes. The AIO board  Matrix 1S 5v1 II combines a flight controller, ESC, ELRS receiver, and analog video transmitter with an OSD chip onto one board. The processor G473 combined with the gyro ICM42688P provides precise control and smooth response. The integrated video transmitter supports power output of 25–400 mW and uses the SmartAudio protocol for easy setup. The drone is equipped with a C03 camera with a resolution of 1200 TVL, a field of view of 160°, and an aspect ratio of 4:3. The camera is protected by a flexible Air Canopy with an adjustable angle of 25–50°. The integrated ELRS receiver operates on a frequency of 2.4 GHz and uses a wired antenna.

The utilized motors BETAFPV 0802 28000KV combined with Gemfan 1614 3-B propellers provide sufficient power for dynamic and accurate maneuvers. The Air75 frame is a lightweight version of the Meteor75 frame and weighs only 4 grams.

Air75 II Champion is an ideal choice for experienced pilots looking for a lightweight and powerful drone for agile flying.

LiPo batteries fit into a space in the frame measuring 16.7×6.3 mm. The drone is equipped with a BT2.0 connector.

1S LiPo batteries with a capacity of around 550mAh are recommended. Batteries are not included.

CLI and Firmware