Bison Super Glue Control 3g
Bison Super Glue Control 3 g is a liquid cyanoacrylate adhesive designed for fast and strong bonding of small surfaces. Thanks to Direct-Stop Technology, it ensures precise application without dripping, allowing clean and controlled use. The bond is water-resistant and dishwasher safe, and once cured, it withstands normal temperature conditions ranging from –40 °C to +80 °C.
The adhesive is suitable for plastics (hard PVC, ABS, PS, plexiglass, polycarbonate), as well as for porcelain, ceramics, leather, metal, wood, cork, felt, textiles, and rubber. It can also be used for bonding plastics with other materials. Not suitable for PE, PP, silicone, PTFE (Teflon), polystyrene foam, and wearable textiles.
Surfaces must be clean, dry, and grease-free. Apply a thin layer of adhesive to one surface, press the parts together immediately, and hold for a few seconds. Excess adhesive may slow down curing. After use, wipe the nozzle and close the cap tightly.
SAFETY INFORMATION
Labeling according to Regulation (EC) No. 1272/2008 (CLP). The product contains substances classified as hazardous under Regulation (EC) No. 1272/2008.
GHS07 - Irritant
Signal word: WARNING
H315 – Causes skin irritation.
H319 – Causes serious eye irritation.
H335 – May cause respiratory irritation.
P101 – If medical advice is needed, have product container or label at hand.
P261 – Avoid breathing vapors.
P302+P352 – IF ON SKIN: Wash with plenty of water and soap.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P501 – Dispose of contents/container in accordance with local regulations.
Hauptmerkmale
- Chemical Base: Ethyl Cyanoacrylate
- Color: Clear
- Consistency: Liquid
- Density: Approximately 1.10 g/cm³
- Initial Strength: 5-60 seconds (depending on conditions)
- Temperature Resistance: -40°C to +80°C
- Humidity Resistance: Good
- Solvent Free: Yes
- Size: 3g
Die Handbücher
Inhalt
- 1x Adhesive
Videos
