Pilotix F405 65A V1 AIO Bluejay

Pilotix F405 65A V1 AIO is a board combining a flight controller and 65A ESC, designed mainly for large 7-10" drones in the Pilotix PT V3 series powered by 3-6S LiPo batteries. Or other large frames that can accommodate a board measuring 79 x 100 mm.

The flight controller is based on the STM32F405 processor combined with the ICM42688-P gyro. For connecting peripherals, the board offers 5 UARTs. The board is also equipped with a barometer for altitude measurement, an I2C bus for connecting a compass, 16MB of Blackbox memory and an AT7456E OSD chip for analog video. The board supports simultaneous connection of two cameras and two video transmitters with the ability to switch between them. Power for peripherals is provided by 5V/2.2A and 12V/2.2A BECs.

The ESC uses Bluejay firmware, handles continuous current of 4x 65A and features a current sensor and a protective TVS diode. A total of 8 motor outputs are available. 4 outputs are connected to motors and the remaining 4 can be used, for example, to connect servo motors. Integrated MR30 connectors allow motors to be connected without soldering, which significantly simplifies drone building.

The board comes with a pre-installed power cable with an XT60 connector, 140 mm long, and 2x 1000 uF / 35V electrolytic capacitors.

Mounting hole spacing is 30.5 x 30.5 mm and 85 x 30.5 mm, board size 79 x 100 mm and weight with soldered cable and connector is 73 g

Wiring diagram