UHU Plast Special für Kunststoffmodelle 30g
UHU Plast Special is a transparent fast-drying adhesive designed for plastic models and plastics. It works on the principle of cold welding, partially dissolving the surface of the plastics to create a very strong bond. Thanks to the needle applicator, it is also suitable for narrow gaps and precise application. Once cured, the joint is water-resistant and clear.
The adhesive is suitable for polystyrene (PS), ABS, SAN, plexiglass (PMMA), hard PVC, celluloid and polycarbonate (PC). It also enables combined bonding with wood, cardboard, or paper. Not suitable for PP, PE, Teflon, and polystyrene foam.
Before use, bonded surfaces must be flat, dry, and grease-free. Apply the adhesive to one surface and press the parts together immediately. For thin materials, only a thin layer should be applied to prevent deformation. Handling strength is achieved after approx. 5 minutes, full strength after 24 hours.
SAFETY INFORMATION
Labeling according to Regulation (EC) No. 1272/2008 (CLP). The product contains substances classified as hazardous under Regulation (EC) No. 1272/2008.
GHS02 - Flammable
GHS07 - Irritant
H336 - May cause drowsiness or dizziness.
H319 - Causes serious eye irritation.
P101 - If medical advice is needed, have product container or label at hand.
P102 - Keep out of reach of children.
P261 - Avoid breathing vapors.
P501 - Dispose of contents/container in accordance with local regulations.
P210 - Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
EUH066 - Repeated exposure may cause skin dryness or cracking.
Hauptmerkmale
- Size: 30g/34ml
Inhalt
- 1x Glue
