We are closed on Friday, June 17, due to technical reasons.

SkyRC D100 V2 2x100W

Auf Lager
€ 117,00

SkyRC D100 V2 is a two-channel battery charger. Each channel allows you to charge 1-6S Lipo with an output of up to 100 W, which is more than enough for FPV batteries. The charger can be powered with a DC voltage of 11-18V, for example from a car battery or socket. When powered from the socket, the charger is also providing a source of DC voltage, which can be used for charging without an integrated source. It has also USB port for charging your phone or camera. The SkyRC D100 V2 simply has everything a charger could have. The charger has Bluetooth 4.0 and allows you to control it using an application on your phone. The charging status can therefore also be checked remotely from the chair. Another feature is "Scan to go", where you can use a QR code with charging parameters for each battery. You can then easily and quickly load these parameters using the mobile application. It uses micro USB available chargers to connect to a PC and perform a firmware update.


The integrated power supply has a power of 100W. When charging from the mains, this power is available between both users and the output sources. When powered by DC voltage for each channel of power 100 W.  So it can charge 2C at home and charge higher power quickly outside for low downtime between flights.

Hauptmerkmale

  • Input voltage: 11-18V DC / 100-240V AC
  • Number of channels: 2
  • Charging power: up to 100W
  • Power supply: 100W
  • Discharge power: 10W
  • Supported batteries: NiCd, NiMH, Li-Pol, Li-Ion, Li-Fe, LiHV, Pb
  • Temperature sensor connector
  • USB output: 5V@2.1A
  • Bluetooth 4.0 and SkyCharger mobile applications
  • Internal power supply output: 13.8V
  • Size: 153x143x67mm
  • Weight: 685g

Inhalt

  • 1x charger
  • 1x AC cord
  • 2x cable with bananas and XT60
  • 2x Cable with bananas and free ends
  • 2x balance connector