We are currently experiencing technical issues. If you received a reminder about an old order, this is an error. We are working intensively on its removal. We apologize for any inconvenience.

Walksnail Avatar HD Mini 1S kit

Auf Lager
€ 134,90

The Walksnail Avatar Mini kit is a combination of a camera, video transmitter and antennas for the Walksnail Avatar digital system. Walksnail Avatar enables video transmission in full HD (1080p) or HD (720p) quality with a low latency of even 22ms and a high refresh rate of 60/120fps and a data throughput of 25/50mbps. The Walksnail Avatar system supports the so-called Canvas mode, in which a classic full-scale OSD can be drawn into the image, as you are used to from the analog world.

The Avatar Mini 1S kit is a smaller version of the Micro Kit designed primarily for Tinywhoopy and other small copters. For transmission, it uses one LHCP antenna connected via a u.FL connector. The video transmitter can be powered by a voltage of 3.1-5V (1S Lipo / 5V BEC). Power is limited to 350mW. The transmitter has an internal 8GB memory, to which it is possible to record images from the camera. For easy installation in the copter, the video transmitter has holes with a pitch of 25.5x25.5mm M2. The camera is Nano sized. It is connected to the video transmitter by a 9cm cable. The aspect ratio is switchable 4:3/16:9.


  • Camera size: Nano - 14x14x17mm
  • Sensor: 1/2.7"
  • Resolution: 1080P/60fps, 720P/120fps, 720P/60fps
  • Aspect ratio: 4:3 / 16:9
  • FOV: 170°
  • Camera weight: 3.5g
  • Coax. cable: 9mm
  • Frequency band: 5725-5850GHz
  • Transmit Power: FCC:<25.5dBm;CE:<14dBm
  • Mounting holes: 25.5x25.5mm M2
  • Size: 33x33x6.5mm
  • Internal memory: 8GB
  • Weight of the video transmitter: 6.8g
  • Power supply: 3.1-5V
  • Antenna connector: u.FL


  • 1x Camera
  • 1x Video transmitter
  • 1x Antenna
  • 1x 4-pin USB cable
  • 1x Power cable
  • 1x Set of screws