XF Headtracker Drahtloses PPM-Modul

A combination of transmitter and receiver that allows wireless transmission of the control PPM signal from the XF Headtracker. The wireless range is only about 7 meters. It is therefore not intended for controlling an RC model but serves for wireless data transfer between the headtracker module and the RC transmitter.

The transmitter unit simply plugs into the dedicated connector on the Headtracker module. The transmitter is powered directly from the Headtracker, which shortens the operating time to approximately 4 hours.

The receiver has a built-in 300mAh 1S LiPo battery that provides about 5 hours of operation. The battery is charged via a USB-C port. The receiver is powered on by pressing a button. A single press checks the battery status. To power on or off, press the button twice, holding the second press for two seconds. The device outputs the PPM signal through a 3.5mm jack. The PPM output can be connected to an RC transmitter via the trainer port.

Both the receiver and transmitter are housed in a 3D-printed plastic case.